Archives: Quiz
978-0205677207 Test Bank Chapter 18
98 Chapter 18—The Age of Faith Multiple Choice Questions 1. Built by Justinian in the first half of the sixth century, what church was probably conceived as a political and religious statement? a) St. Apollinaire. b) Santa Costanza. c) San […]
978-0205677207 Test Bank Chapter 17
92 Chapter 17 – The Ancient World Multiple Choice Questions 1. The drawings from Ardèche Gorge are located in southern France at: a) Chauvet cave. b) La Villedorphe. c) Lascaux cave. d) Nomadic cave. 2. The figures from the Abu […]
978-0205677207 Test Bank Chapter 16
88 Chapter 16—The Design Profession Multiple Choice Questions 1. Which nineteenth-century building by Joseph Paxton could be considered an early example of the relationship between new technology and architecture? a) the Red House. b) the Palais Stoclet. c) the Houses […]
978-0205677207 Test Bank Chapter 15
82 Chapter 15 – Architecture Multiple Choice Questions 1. It is thought that the sloping sides of the pyramids in Egypt were intended to mimic: a) the sands of the Sahara. b) the rays of the sun. c) the orb […]
978-0205677207 Test Bank Chapter 14
Chapter 14 – The Crafts as Fine Art Multiple Choice Questions 1. A work in which weft yarns of several different colors are manipulated to make a design is called: a) weaving b) embroidery c) collage d) afghan Answer: (a) […]
978-0205677207 Test Bank Chapter 13
Chapter 13 – Sculpture Multiple Choice Questions 1. Maidens and Stewards, a Parthenon fragment of the Panathenaic Procession, illustrates a _______, or sculptural band, often used by the Greeks to embellish their architecture. a) high-relief b) free-standing c) frieze d) […]
978-0205677207 Test Bank Chapter 12
Chapter 12– Photography and Time-Based Media Multiple Choice Questions 1. Perfecting the photographic process, Louis Daguerre, in Le Boulevard du Temple, was able to include __________ in his photographs. a) buildings b) street scenes c) people d) motion Answer: (c) […]
978-0205677207 Test Bank Chapter 11
Chapter 11 – Painting Multiple Choice Questions 1. A master of perspective, _______ painted The Glorification of Saint Ignatius for the Church of Sant’ Ignazio in Rome. a) Fra Angelico b) Fra Andrea Pozzo c) Michelangelo d) Giotto Answer: (b) […]
978-0205677207 Test Bank Chapter 10
52 Chapter 10 – Printmaking Multiple Choice Questions 1. A woodcut print such as Emile Nolde’s Prophet is an example of: a) silkscreen. b) a monotype print. c) a relief print. d) lithography. 2. The artist of Rue Transnonain was […]
978-0205677207 Test Bank Chapter 9
46 Chapter 9 – Drawing Multiple Choice Questions 1. (Slide: Raphael’s Saint Paul Rending his Garments) (fig. 224; p. 176) Raphael’s Saint Paul Rending his Garments illustrates the skill and patience required of which dry medium? a) conte crayon b) […]
978-0205677207 Test Bank Chapter 8
41 Chapter 8 – The Principles of Design Multiple Choice Questions 1. Hokusai’s The Great Wave makes a statement about scale, in part because: a) the print is 86 inches in height. b) any black-and-white art causes scale to feel […]
978-0205677207 Test Bank Chapter 7
37 Chapter 7 – Other Formal Elements Multiple Choice Questions 1. Which of the artists below created a work titled Pietà? a) Leonardo da Vinci b) Joan Snyder c) Michelangelo d) Manuel Neri 2. The systematic and repetitive use of […]
978-0205677207 Test Bank Chapter 6
31 Chapter 6 – Light and Color Multiple Choice Questions 1. The artist Artemisia Gentileschi heightens the drama of Judith and Maidservant with the Head of Holofernes by using a technique that comes from an Italian word meaning “murky.” This […]
978-0205677207 Test Bank Chapter 5
25 Chapter 5 – Space Multiple Choice Questions 1. Leonardo da Vinci’s The Last Supper is based on what specific type of perspective? a) isometric perspective b) trimetric perspective c) one-point linear perspective d) two-point linear perspective 2. Gustave Caillebotte’s […]
978-0205677207 Test Bank Chapter 4
20 Chapter 4 – Line Multiple Choice Questions 1. The Starry Night, by Vincent van Gogh, indicates the power of the artist’s _______ line. a) expressive b) analytical c) classical d) contour 2. Pat Steir’s series The Drawing Lesson Part […]
978-0205677207 Test Bank Chapter 3
15 Chapter 3 – Seeing the Value in Art Multiple Choice Questions 1. In 1863, Edouard Manet’s Déjeuner sur l’herbe was rejected by the public due to: a) its depiction of a picnic. b) the representation of a woman bathing […]
978-0205677207 Test Bank Chapter 2
8 Chapter 2 – Developing Visual Literacy Multiple Choice Questions 1. In The Treason of Images, the artist combines awareness, creativity, and communication by encouraging the viewer to look closely at an object. The artist is: a) Lorna Simpson. b) […]
978-0205677207 Test Bank Chapter 1
0 Test Item File For Henry Sayre’s A World of Art Sixth Edition By Bryan Wheeler Texas Tech University Copyright © 2010 Pearson Education, Inc. All rights reserved. Manufactured in the United States of America. The contents, or parts thereof, […]
978-0134891262 Test Bank Chapter 20
Process Technology Equipment, 2e (NAPTA) Chapter 20 Auxiliary Equipment 1) What type of auxiliary equipment generates turbulence and promotes mixing? A) Mixer B) Agitator C) Eductor D) Ejector Answer: B Explanation: A) Incorrect. A mixer is a piece of equipment […]
978-0134891262 Test Bank Chapter 19
Process Technology Equipment, 2e (NAPTA) Chapter 19 Environmental Control Equipment 1) What adverse health effects have been linked to the particulates released by some process equipment? A) Cancer B) Death C) Heart disease D) Pneumonia Answer: A Explanation: A) Correct. […]
978-0134891262 Test Bank Chapter 18
Process Technology Equipment, 2e (NAPTA) Chapter 18 Solids Handling Equipment 1) What solids handling equipment carries material to a process device? A) Feeder B) Extruder C) Screener D) Conveyor Answer: A Explanation: A) Correct. A feeder is a piece of […]
978-0134891262 Test Bank Chapter 17
Process Technology Equipment, 2e (NAPTA) Chapter 17 Filters and Dryers 1) Which of the following factors should be considered when selecting the appropriate filter? A) Type of material being filtered B) Size of particles to be removed C) Degree of […]
978-0134891262 Test Bank Chapter 16
1 Process Technology Equipment, 2e (NAPTA) Chapter 16 Reactors 1) What type of reactor can operate at higher pressures? A) Tubular reactor B) Fixed bed reactor C) Stirred tank reactor D) Fluidized bed reactor Answer: C Explanation: A) Incorrect. A […]
978-0134891262 Test Bank Chapter 15
1 Process Technology Equipment, 2e (NAPTA) Chapter 15 Vessels 1) Which of the following is NOT a factor that affects vessel design and construction? A) Product type B) Corrosion factor C) Viscosity of the product D) Chemical properties Answer: C […]
978-0134891262 Test Bank Chapter 14
1 Process Technology Equipment, 2e (NAPTA) Chapter 14 Boilers 1) What component of a boiler injects air and fuel through a distribution system that mixes them in proper concentrations, so combustion can occur? A) Burners B) Boiler feedwater system C) […]
978-0134891262 Test Bank Chapter 13
1 Process Technology Equipment, 2e (NAPTA) Chapter 13 Furnaces 1) What type of furnace is used to heat process fluids or generate steam? A) Box furnace B) Vertical furnace C) Cabin furnace D) Cylindrical furnace Answer: A Explanation: A) Correct. […]
978-0134891262 Test Bank Chapter 12
Process Technology Equipment, 2e (NAPTA) Chapter 12 Cooling Towers 1) What type of cooling tower uses temperature differences inside and outside the stack to facilitate air movement? A) Natural draft B) Induced draft C) Forced draft D) Open draft Answer: […]
978-0134891262 Test Bank Chapter 11
1 Process Technology Equipment, 2e (NAPTA) Chapter 11 Heat Exchangers 1) What is a primary mode of heat transfer utilized in heat exchangers? A) Emission B) Radiation C) Conduction D) Transference Answer: C Explanation: A) Incorrect. The primary modes of […]
978-0134891262 Test Bank Chapter 10
1 Process Technology Equipment, 2e (NAPTA) Chapter 10 Power Transmission and Lubrication 1) What is the power consumed by a current of one amp using an electromotive force of one volt? A) Ohm B) Amp C) Watt D) Volt Answer: […]
978-0134891262 Test Bank Chapter 9
1 Process Technology Equipment, 2e (NAPTA) Chapter 9 Motors and Engines 1) What is a mechanical driver that converts electrical energy into useful mechanical work and provides power for rotating equipment? A) Motor B) Torque C) Engine D) Drivers Answer: […]
978-0134891262 Test Bank Chapter 8
1 Process Technology Equipment, 2e (NAPTA) Chapter 8 Turbines 1) Which of the following is one of the most common types of turbines? A) Gas B) Wind C) Electric D) Hydraulic Answer: A Explanation: A) Correct. The two most common […]
978-0134891262 Test Bank Chapter 7
1 Process Technology Equipment, 2e (NAPTA) Chapter 7 Compressors 1) Which of the following should be considered when selecting a type of compressor? A) Viscosity B) Discharge pressure C) Type of liquid being compressed D) All of the above Answer: […]
978-0134891262 Test Bank Chapter 6
1 Process Technology Equipment, 2e (NAPTA) Chapter 6 Pumps 1) Which of the following is an application of pumps? A) Filling tanks B) Emptying trenches C) Supplying water to boilers D) All of the above Answer: D Explanation: A) Incorrect. […]
978-0134891262 Test Bank Chapter 5
1 Process Technology Equipment, 2e (NAPTA) Chapter 5 Valves 1) What type of valve is a positive shutoff valve that utilizes a gate or guillotine which, when moved between two seats, causes a tight shutoff? A) Gate B) Globe C) […]
978-0134891262 Test Bank Chapter 4
1 Process Technology Equipment, 2e (NAPTA) Chapter 4 Piping, Gaskets, Tubing, Hoses, and Fittings 1) What are flat pieces of a material used to make a seal between two piping or equipment connection points? A) Hoses B) Gaskets C) Blinds […]
978-0134891262 Test Bank Chapter 3
1 Process Technology Equipment, 2e (NAPTA) Chapter 3 Tools 1) What is the factor by which a device multiplies the force that is applied? A) Tool advantage B) Torque advantage C) Force factor D) Mechanical advantage Answer: D Explanation: A) […]
978-0134891262 Test Bank Chapter 2
1 Process Technology Equipment, 2e (NAPTA) Chapter 2 Process Diagrams and Equipment Standards 1) What is used in a block flow diagram to represent sections of a process? A) Arrows B) Circles C) Blocks D) Diamonds Answer: C Explanation: A) […]
978-0134891262 Test Bank Chapter 1
1 Process Technology Equipment, 2e (NAPTA) Chapter 1 Introduction to Process Equipment 1) Which of the following industries is NOT classified as a process industry? A) Chemical manufacturing B) Clothing manufacturing C) Food and beverage production D) Paper and pulp […]
978-0134731889 Test Bank Chapter 17 Part 2
30) ________ tend to be significant consumers of energy and water and emitters of waste and greenhouse gases and thus offer significant opportunities for profitable improvement. A) Employees B) Production processes C) Facilities D) Vehicles Answer: C Diff: 2 Topic: […]
978-0134731889 Test Bank Chapter 17 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 17 Sustainability and the Supply Chain 17.1 True/False Questions 1) A focus on sustainability allows a supply chain to better serve more environmentally conscious customers while often improving supply chain […]
978-0134731889 Test Bank Chapter 16 Part 2
33) A shortage of capacity (or inventory) occurs when A) there are excessive cancellations. B) there are few cancellations. C) an expensive backup needs to be arranged. D) B and C only Answer: B Diff: 1 Topic: 16.3: Dynamic Pricing […]
978-0134731889 Test Bank Chapter 16 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 16 Pricing and Revenue Management in a Supply Chain 16.1 True/False Questions 1) Revenue management is the use of marketing to increase the profit generated from a limited supply of […]
978-0134731889 Test Bank Chapter 15 Part 2
30) Supplier performance should be compared based on A) purchase price alone. B) its impact on total cost. C) the supplier’s quality of material. D) the ability of the supplier to coordinate forecasting and planning. Answer: B Diff: 3 Topic: […]
978-0134731889 Test Bank Chapter 15 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 15 Sourcing Decisions in a Supply Chain 15.1 True/False Questions 1) Sourcing processes include the selection of suppliers, design of supplier contracts, product design collaboration, procurement of material, and evaluation […]
978-0134731889 Test Bank Chapter 14 Part 2
33) The Mumbai dabbawalas have a transportation network that at the beginning of each day is best described as A) a milk run. B) direct shipping to a single destination. C) a tailored network. D) direct shipping from source to […]
978-0134731889 Test Bank Chapter 14 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 14 Transportation in a Supply Chain 14.1 True/False Questions 1) Transportation plays a key role in every supply chain because products are usually produced and consumed in the same location. […]
978-0134731889 Test Bank Chapter 13 Part 2
38) A retailer places an order for the new Bagpipe 2018™ from the supplier and takes note of the demand pattern. They use this knowledge of the demand to place a second order of Bagpipe 2018 from the supplier. This […]
978-0134731889 Test Bank Chapter 13 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 13 Linking Product Availability to Profits 13.1 True/False Questions 1) A supply chain can use a high level of product availability to improve its responsiveness and attract customers. Answer: TRUE […]
978-0134731889 Test Bank Chapter 12 Part 2
34) The expected shortage per replenishment cycle (ESC) is A) the units of demand that are satisfied from inventory out of stock in a given replenishment cycle. B) the units of demand that are satisfied from inventory in stock in […]
978-0134731889 Test Bank Chapter 12 Part 1
Supply Chain Management: Strategy, Planning, and Operation, 7e (Chopra) Chapter 12 Managing Uncertainty in a Supply Chain: Safety Inventory 12.1 True/False Questions 1) Safety inventory is inventory carried for the purpose of satisfying demand that exceeds the amount forecasted for […]