Unlock document.
This document is partially blurred.
Unlock all pages and 1 million more documents.
Get Access
1
Process Technology Equipment, 2e (NAPTA)
Chapter 3 Tools
1) What is the factor by which a device multiplies the force that is applied?
A) Tool advantage
B) Torque advantage
C) Force factor
D) Mechanical advantage
2) What type of pliers have a tongue and groove joint or slot that allows the jaws to widen and
grip objects of different sizes?
A) Locking pliers
B) Adjustable pliers
C) Needle nose pliers
D) Lineman's pliers
2
3) What type of pliers have long, thin jaws for fine work?
A) Locking pliers
B) Adjustable pliers
C) Needle nose pliers
D) Lineman's pliers
4) What type of wrench is also referred to as a Crescent® wrench?
A) Socket wrench
B) Adjustable wrench
C) Pipe wrench
D) Impact wrench
3
5) What type of wrench is a pneumatically or electrically powered wrench that uses repeated
blows from small internal hammers that generate torque to tighten or loosen fasteners?
A) Pipe wrench
B) Impact wrench
C) Torque wrench
D) Valve wheel wrench
6) Which of the following power tools is a device that contains a rotating bit designed to bore
holes into various types of materials?
A) Drill
B) Hoist
C) Grinder
4
7) What type of lifting equipment is composed of a pulley or gear system with a cable or chain
used to lift and move heavy objects?
A) Hoist
B) Crane
C) Forklift
D) Dolly
8) What type of lifting equipment is a vehicle with elongated prongs (forks) used for lifting and
transporting equipment or pallets of product?
A) Hoist
B) Crane
C) Forklift
D) Dolly
5
9) What type of overhead crane system runs on elevated rails attached to a frame or set of legs?
A) Gantry cranes
B) Jib cranes
C) Monorail cranes
10) What type of overhead crane system consists of a pivoting head and boom assembly that
carries a hoist and trolley unit?
A) Gantry cranes
B) Jib cranes
C) Monorail cranes
D) Overhead traveling bridge cranes
11) Which of the following is a safety tip for tool use?
A) Use the right tool for the job.
B) Check that edged tools are dull.
C) Wear loose clothing.
D) Ensure that another worker is close when you are using tools.
6
12) Which of the following is a general safety tip when using hand tools?
A) Modify a tool to do the task you require.
B) Use screwdrivers as chisels or gouges.
C) Overtighten fasteners.
13) Which of the following safety procedures should you follow when using power tools?
A) Do not use tools that are too heavy or too difficult to control.
B) Do not carry the tool by its cord or hose.
C) Do not yank the tool cord or hose to disconnect it.
D) All of the above
7
14) Keep your equipment in ________ to make the job easier and safer.
A) top working condition
B) acceptable working condition
C) an easy-to-find location
D) overhead cabinets
