CCNA Guide to Cisco Networking, Fourth Edition Chapter 9 Lab Solutions
Chapter 9 Lab Solutions
Activity Questions Lab 9.1
5. That the inside IP address 192.168.100.1 will always use the outside address
7. That the f0/0 interface is to be considered the inside
15. The inside and outside interfaces, the number of hits and misses, the configured
access list, how many IP addresses are in the pool, and what percent of those
addresses have been allocated
Review Questions Lab 9.1
1. Does static NAT conserve IP addresses? Why or why not?
2. Does PAT conserve IP addresses? Why or why not?
3. Why do dynamic NAT and PAT required configuration of an access list?
4. What is the purpose of the address pool in dynamic NAT?
5. Give three reasons for using NAT.
Activity Questions Lab 9.2
5. Defines the name of the pool of addresses
7. Default gateway
10. Directs the clients to 210.93.105.3 for WINS resolution
13. Varies but should be a valid IP address on the same network as F0/0 on the
student’s router
15. One day
18. 254; 1
CCNA Guide to Cisco Networking, Fourth Edition Chapter 9 Lab Solutions
2
Review Questions Lab 9.2
1. What is the benefit of using DHCP?
2. What is the benefit of configuring a router to be the DHCP server rather than a
computer?
3. True or False. DHCP functionality requires that both the server and the client be
configured for DHCP.
4. List three addresses you would typically exclude from a DHCP pool.
Review Questions Lab 9.3
1. When might you decide to use SDM to configure NAT, DHCP, and DNS?
2. What is the only difference between configuring dynamic NAT and configuring PAT?
3. What is your opinion regarding using the SDM for configuring NAT?
4. What is your opinion regarding using the SDM for configuring DHCP?