CORE CURRICULUM
Introduction to Power Tools 00104-15
Introduction to Power Tools 00104-15
Session 2: Saws, Part 2; Other Power Tools
Session Two Objectives
When trainees have completed this session, they should be able to do
the following:
2. Identify and explain how to use various types of power saws.
3. Identify and explain how to use various grinders and grinder attachments.
4. Identify and explain how to use miscellaneous power tools.
a. Identify and explain how to use pneumatic and powder-actuated
Introduction to Power Tools 00104-15
Session Two Performance Tasks
Introduction to Power Tools 00104-15
Safely and properly demonstrate the use of the following tool(s):
•Portable band saw
•Used almost exclusively on metal.
•Little or no added pressure is required. Check for blade wear if the cut is not
progressing as expected.
Introduction to Power Tools 00104-15
Sections 2.4.0 and 2.4.1 –Miter Saws
Compound miter saws allow for multiple angles in a single cut.
Introduction to Power Tools 00104-15
Section 3.1.0 –Grinders
Angle grinders are very common metalworking tools, especially for
Introduction to Power Tools 00104-15
Section 3.1.0 –Grinders
Introduction to Power Tools 00104-15
Die grinders and detail grinders are used for finer work, such
Sections 3.1.1 and 3.1.2 –Grinders
Introduction to Power Tools 00104-15
Sections 3.1.1 and 3.1.2 –Grinders
Introduction to Power Tools 00104-15
Grinder Safety
•Face shields should be worn with all grinders.
Section 4.1.0 –Nailers
Pneumatic nailers can set
Introduction to Power Tools 00104-15
Section 4.1.0 –Nailers
Powder-actuated tools are excellent when there is no air or
Introduction to Power Tools 00104-15
Section 4.2.0 –Pavement Breakers
A variety of attachments are
available for pavement
Introduction to Power Tools 00104-15
Section 4.3.0 –Jacks
Jacks can be used for various tasks, such as raising equipment
Introduction to Power Tools 00104-15
Next Session…
LABORATORY:
USING POWER TOOLS
Introduction to Power Tools 00104-15