CORE CURRICULUM
Introduction to Power Tools 00104-15
Introduction to Power Tools 00104-15
Session 1: Drills; Saws, Part 1
Session One Objectives
When trainees have completed this session, they should be able
to do the following:
1. Identify and explain how to use various types of power drills and
impact wrenches.
2. Identify and explain how to use various types of power saws.
Introduction to Power Tools 00104-15
Session One Performance Task
Introduction to Power Tools 00104-15
Safely and properly demonstrate the use of the following
tool(s):
Section 1.1.0 –Drills and Bits
Introduction to Power Tools 00104-15
Basic drill design is the same for most types, with only slight
differences.
Introduction to Power Tools 00104-15
Bit selection depends upon the material being drilled and, of
course, the size of the hole required.
Section 1.1.0 –Drills
Introduction to Power Tools 00104-15
These drills work well between studs and joists in
Section 1.1.2 –Drills
Introduction to Power Tools 00104-15
These drills are operated like a drill press, using a hand wheel
Section 1.1.3 –Using a Drill
Introduction to Power Tools 00104-15
Section 1.1.3 –Using a Drill
Section 1.2.0 –Rotary Hammers
Introduction to Power Tools 00104-15
Section 1.2.0 –Rotary Hammers
Introduction to Power Tools 00104-15
Each rotary hammer brand requires a specific bit shank style.
Sections 1.3.1 to 1.3.3 –Pneumatic Tools
Introduction to Power Tools 00104-15
Pneumatic drills and impact wrenches eliminate the electric
Sections 1.3.1 to 1.3.3 –Pneumatic Tools
Introduction to Power Tools 00104-15
A whip check keeps the hose from whipping about if the
Section 2.1.0 –Circular Saws
Introduction to Power Tools 00104-15
Like drills, all circular saws have a great deal in common.
Section 2.1.0 –Circular Saws
Introduction to Power Tools 00104-15
Blade choice depends upon the material being cut, cut direction (cross-cut
Sections 2.1.1 and 2.1.2 –Circular Saws
Introduction to Power Tools 00104-15
The saw kerf must be considered in measurements and when
Sections 2.1.1 and 2.1.2 –Circular Saws
•As you mark the cut line, mark an X on the side that is
waste.
Section 2.2.1 –Saber Saws
Introduction to Power Tools 00104-15
Sections 2.2.2 to 2.2.4 –Reciprocating Saws
Introduction to Power Tools 00104-15
These saws are excellent for demolition work. Their
Sections 2.2.2 to 2.2.4 –Reciprocating Saws
Introduction to Power Tools 00104-15
•Clamp the workpiece down or be sure that what is being
Next Session…
SAWS, PART 2; OTHER POWER TOOLS
Introduction to Power Tools 00104-15