Unlock document.
This document is partially blurred.
Unlock all pages and 1 million more documents.
Get Access
VISUAL #10-1
FORMULAS FOR DEPRECIATION METHODS
1. STRAIGHT LINE
2. UNITS OF PRODUCTION
(Depreciable)
a) FHC - Estimated salvage Cost per
3. DOUBLE-DECLINING BALANCE
Book Value (beginning of year) x RATE* = Depreciation (for that year)
*RATE The rate used is constant and it is twice what the
straight line rate would have been for this asset.
(In the last year, depreciate to estimated salvage value; never
depreciate below this amount.)
=
Alternate Demonstration Problem
Chapter Ten
A new machine costs $120,000, has an estimated useful life of five years
and an estimated salvage value of $15,000 at the end of that time. It is
expected that the machine can produce 210,000 widgets during its useful
life.
The New Times Company purchases this machine on January 1, 2013, and
uses it for exactly three years. During these years the annual production of
widgets has been 80,000, 50,000, and 30,000 units, respectively. On January
1, 2016, the machine is sold for $45,000.
Required:
1. Calculate the depreciation expense for each of the first three years
using:
a. Straight-line
b. Units-of-production
c. Double-declining-balance
2. Prepare the proper journal entry for the sale of the machine under the
three different depreciation methods.
Solution: Alternate Demonstration Problem
Chapter Ten
1a. Straight-line
The depreciation expense each year is equal to cost minus salvage
value divided by useful life. In this example the cost is $120,000, the
1b. Units-of-production
The depreciation expense each year is equal to a rate [(cost minus
salvage) divided by total production] multiplied by the actual number
of units produced that year. In this example the rate would be $0.50
per widget, (120,000 - 15,000) / 210,000, and the depreciation expense
for each of the first three years would be:
1c. Double-declining balance
The depreciation expense each year is equal to a rate (twice the
straight-line rate divided by useful life) multiplied by the asset’s net
book value (cost minus accumulated depreciation) at the beginning
of the year. In this example the rate would be 2/5, or 40%, and the
depreciation expense for each of the first three years would be:
2. The journal entry for the sale of the asset will have the same general
form regardless of the method of depreciation adopted, except that
whether there is a gain or a loss on the sale may change according to
the depreciation method used. The gain or loss on disposal of the asset
is determined by comparing the sale price, in this case $45,000, with the
net book value of the asset at the time of the sale.
Straight-line
* Book value of 57,000 less sale price $45,000 equals loss of $12,000
Units-of-production
* Sale price $45,000 less book value of $40,000 equals gain of $5,000
Double-declining balance
Alternate Demonstration Problem #2
Chapter Ten
A new van costs $25,000, has an estimated useful life of five years and an
estimated salvage value of $5,000 at the end of that time. It is expected that
the van will be driven 100,000 miles during its useful or service life.
The Nation Express Company purchases this van on April 1, 2014. During
2014 the van is driven 13,000 miles and during 2015 it was driven 21,000
miles.
Required:
1. Calculate the depreciation expense for 2014 and 2015 using:
a. Straight-line
b. Double-declining-balance
c. Units-of-production
Solution: Alternate Demonstration Problem #2
Chapter Ten
Straight Line
Cost - Salvage value = 25000 - 5000
useful life 5 years
Double declining balance
2 x
book
value = Depreciation expense
life
Units of Production
cost - salvage = depreciation rate per mile
total miles
Rate x
actual
mileage =
Depreciation
expense
$
per
100,000 miles
rate x
actual
mileage = Expense
