This document is partially blurred.
Unlock all pages and 1 million more documents.
Get Access
PROBLEM 6.F4
Knowing that the pulley has a radius of 0.5 m, draw the
free-body diagram(s) needed to determine the components
of the reactions at A and E.
PROBLEM 6.F5
An 84-lb force is applied to the toggle vise at C. Knowing that
= 90,
draw the free-body diagram(s) needed to determine the vertical force
exerted on the block at D.
PROBLEM 6.F6
For the system and loading shown, draw the free-body diagram(s)
needed to determine the force
P
required for equilibrium.
PROBLEM 6.F7
A small barrel weighing 60 lb is lifted by a pair of tongs as shown.
Knowing that a = 5 in., draw the free-body diagram(s) needed to
determine the forces exerted at B and D on tong ABD.
PROBLEM 6.F8
The position of member ABC is controlled by the
hydraulic cylinder CD. Knowing that θ 30°,
draw the free-body diagram(s) needed to
determine the force exerted by the hydraulic
cylinder on pin C, and the reaction at B.
Trusted by Thousands of
Students
Here are what students say about us.
Resources
Company
Copyright ©2022 All rights reserved. | CoursePaper is not sponsored or endorsed by any college or university.