PROBLEM 5.106
Locate the center of gravity of the sheet-metal form shown.
PROBLEM 5.107
Locate the center of gravity of the sheet-metal form shown.
PROBLEM 5.108
A corner reflector for tracking by radar has two sides in the
shape of a quarter circle with a radius of 15 in. and one side in
the shape of a triangle. Locate the center of gravity of the
reflector, knowing that it is made of sheet metal of uniform
thickness.
PROBLEM 5.109
A wastebasket, designed to fit in the corner of a room, is 16 in.
high and has a base in the shape of a quarter circle of radius 10
in. Locate the center of gravity of the wastebasket, knowing
that it is made of sheet metal of uniform thickness.
PROBLEM 5.110
An elbow for the duct of a ventilating system is made of sheet
metal of uniform thickness. Locate the center of gravity of the
elbow.
PROBLEM 5.110 (Continued)
PROBLEM 5.111
A window awning is fabricated from sheet metal of uniform
thickness. Locate the center of gravity of the awning.
PROBLEM 5.111 (Continued)
PROBLEM 5.112
A mounting bracket for electronic components is formed
from sheet metal of uniform thickness. Locate the center of
gravity of the bracket.
PROBLEM 5.113
A thin sheet of plastic of uniform thickness is bent to form
a desk organizer. Locate the center of gravity of the
organizer.