There are 50 tens in the number 509.
The total number of threads defined is typically in the thousands to maximize the
utilization of the GPU processor cores as well as maximize the available speedup.
From a user’s point of view the two most important characteristics of memory are
capacity and _____________.
External memory is often equated with main memory.
CUDA C is a C/C++ based language.
It is not important for the programmer to understand the nuances of the various GPU
memories.
__________ explicitly specifies which segment register an instruction should use,
overriding the default segment-register selection generated by the x86 for that
instruction.
A __________ occurs when the pipeline, or some portion of the pipeline, must stall
because conditions do not permit continued execution.
The _________ is a program that manages the computer’s resources, provides services
for programmers, and schedules the execution of other programs.
The ________ protects critical data used by the operating system from user
applications, separating processing tasks by disallowing access to each other’s data,
disabling access to memory regions, allowing memory regions to be defined as
read-only, and detecting unexpected memory accesses that could potentially break the
system.
A _________ is a relatively small PLD that contains two levels of logic, an AND-plane
and an OR-plane, where both levels are programmable.
Cache memory is a much faster memory than the register file.
The ________ flag allows the programmer to disable debug exceptions so that the
instruction can be restarted after a debug exception without immediately causing
another debug exception.
The two basic tasks performed by a microprogrammed control unit are microinstruction
sequencing and microinstruction __________.
A(n) _________ interrupt is generated by a timer within the processor and allows the
operating system to perform certain functions on a regular basis.
The rotating interrupt mode allows the processor to inhibit interrupts from certain
devices.
Hexadecimal notation is only used for representing integers.
The advantage of horizontal microinstructions is that they are more compact than
vertical microinstructions, at the expense of a small additional amount of logic and time
delay.