ABSTRACT
This project is totally dedicated to the fresh Network Engineer for new and smart learning of the
Network Structure. In this concept it is possible for the networker to set the company’s inside
network with the different departments of the company. In this logic we use the multiple Routing
Protocols in different areas of the inside company.. Now it will show the proper movement &
control of the Network and the use of the different Routing Protocol inside the Company
Premises. The Network has been managed such a way that any person sitting inside the Network
Bulls Company can access & correlate with any department of Network Bulls. The project
explains that how the Managing Director & the CEO of Network Bulls is managing & operating
the company’s work. The Administration block of Network Bulls is placed in other block of the
building where any employee of the organization can ping the Admin Block but cannot access.
The Sales Department & the HR Department of the Organization are also placed in separate part
of the building but can access any other part. The Technical & Management teams have been
provided a Flat Network Topology. The Technical & Management Departments again have been
divided into the different Line of Business in the form of VLANs. Different Routing Protocols
have been applied including RIP & OSPF technology. The Redistribution Technique & Split
Horizon have also been applied for the demonstration & avoiding the different Routing
Techniques and to overcome the limits associated with them.
A Seminar Report
on
COMPONY’s NETWORK
Submitted by
_______
In partial fulfillment for the award of the completion
Of
Cisco Certified Network Associate
At
Network Bulls Private Limited.
Gurgaon
On
—st December 2056
UNDER THE GUIDANCE OF
_______
_________
SUBMITTED BY: ________
ACKNOWLEDGEMENT
Before we get into the actual report, we would like to express our gratitude to all those who
helped us in shaping up this project. In numerous ways, people who gave unending support right
from the start.
We would like to thank Mr. _______whose guidance and stimulating suggestions helped me
conceive the idea of the project.
We would also like to thankour project coordinator Mr. (_______) and our guide Mr. (_______),
for their encouragement, support and perseverance shown during the course of my project.
We would also like to take this opportunity to thank our teachers for their continued
understanding, active involvement, inspiration and patience.
Submitted By:
________
NAME OF THE COLLEGE
CERTIFICATE FROM SUPERVISOR
This is to certify that the project entitled “COMPANY’S NETWORK” which is being
submitted by _______ to the Department Of Computer Science Engineering, (COLLEGE
NAME) College Of Engineering, Gurgaon, in partial fulfillment of requirement of the certificate
of Summer Training Program/Internship in (Cisco Certified Network Engineer) is a record of
bona fide work carried out by him under my guidance and supervision.
Mr. _______(PROJECT GUIDE)
Lecturer
Department of Computer ScienceEngineering
_____ College of Engineering
Ms. _______ (PROJECT COORDINATOR)
Lecturer
Department of Computer ScienceEngineering
_____ College of Engineering
Dr. _______(HEAD OF DEPARTMENT)
Professor
Department of Computer ScienceEngineering
_____ College of Engineering
CERTIFICATE FROM STUDENT
This is to certify that the work embodied in this project entitled “COMPANY’S NETWORK”
submitted to the Department of Computer Science & Engineering, ____ College of Engineering,
Gurgaon for the fulfillment of the requirement for the award of Degree of “Summer Training in
Cisco Certified Network Engineer” is my authentic record of my work carried out and written by
me under the direct supervision and guidance of Mr. ____ (Department of Computer Science
Engineering) and also to Mr. ____ (Department of Computer Science Engineering).
Submitted By:
_______
NAME OF THE COLLEGE
Chapter 1
INTRODUCTION
Here are some ideas of projects in the Networking area. Some of these are new, and
some are ideas that have run before but could be run again. Note that, unlike the
normal project ideas, these ideas do not have a contact listed against them. They are
there to give you ideas of the sort of things that could be done. If a project idea
seems interesting, and you would like to pursue it further, then you should discuss it
with one of the lecturers who are experienced in the Networking area: Bill Buchanan,
Gordon Russell, Ahmed Al-Dubai, ImedRomdhani, Jim Jackson, Robert Ludwiniak
or Neil Urquhart. They may not be able to help you directly, but will at least be able to
point you to somebody better placed, perhaps because their specialist knowledge is
in the area of the project.
This introduces the underlying concepts behind networking using the
Internet and its protocols as examples. There are two goals:
(1) to give you an understanding of how networks, especially the Internet, work,
(2) to teach you network programming.
We will cover the first five chapters of Kurose in detail, working our way down
the network stack from the application layer to the data-link layer. Concurrent
with the lectures, you (in groups of two) will be building a functional TCP/IP
stack and a small web server that will run on it. What you build will be “real” –
your code will interoperate with other TCP/IP stacks and you’ll be able to talk to
your web server using any browser on any TCP/IP stack.
This is a learn-by-doing kind of class. You will get your hands dirty by
examining parts of our Internet infrastructure and building other parts. It will be
a lot of work, but it will also be a lot of fun, provided you enjoy this sort of thing.
We will assume that you do and that you will make a good faith effort. We don’t
want to have to spend too much time measuring your performance. If you care
about what we’re teaching, you’ll do a better job of that yourself, and if you don’t
care, then you should take some course that you do care about.
The goal of the networking project is to enable you to do the following:
Build implementations of the Internet protocols
Generalize this knowledge to other networking protocols.
Be a competent network and systems programmer.
Think like a networking practitioner
Read and judge articles on networking in trade magazines
Begin to read and judge research and technical articles on networking
Create simplicity and reliability out of complexity and unreliability
Structure and design software systems to achieve that simplicity and
Reliability
Chapter 2
Project Specification
2.1 Hardware Specification
CPU Speed :2GHz recommended or higher
Processor :Pentium Processor or above
Memory/RAM: 1GB minimum,2GB recommended or higher
Display Properties: Greater than 256 color depth
Size of Hard Disk:60GBminimum
NIC Card
2.2 Software Specification
Software Used: Packet Tracer 5.3.2
Operating System: Microsoft Windows XP,Vista,7
2.2.1Packet Tracer
